April 27, 2019 at 12:08 pm #23604
I wonder if any one can help finding the end plug for my Vulcan .25
as you can see in the pictures, it is damaged, and air will leak from the air tube.
Contacted the dealer here in Saudi Arabia, unfortunately, he does not have it.
I contacted Evegny a couple of days ago, but still no reply.
it would be great If any of you can direct me where to buy a new oneApril 27, 2019 at 12:44 pm #277140
Make sure you send him also the picture of that valve body, I looked into the old manual and they call it 4 gauge body (complete nonsense)
You must be clear what you ask for to avoid misunderstanding.
Once they pick up your email, you should be good. Keep pestering them.
What happened?April 27, 2019 at 5:16 pm #277143
I sent the pictures and tried to explain what I need and make it as clear as possible.
This is how I found it after lending it to a friend. He brought it back telling me it is leaking air.
What happened !!
He said nothing, just leaking.
I learned my lessonApril 28, 2019 at 1:19 pm #277145
Uppertite, You’ll hear back from Evgeny, it may take a few days, but he’ll get back. He may even replace it for free, like he’s done for me. I had a bad regulator and instead of sending me parts for it he replaced the whole regulator free of charge.April 28, 2019 at 9:45 pm #277148
I certainly hope soAugust 28, 2019 at 8:19 pm #457992
HootAugust 29, 2019 at 2:03 pm #458284
Yeah, whatever happened??September 4, 2019 at 5:07 pm #473578
I remember I posted here ( the older version of the forums )
Evgeny was kind enough to send me this part, and yes for free
I really can not thank him enough.
I have already installed it, my Vulcan is singing againSeptember 5, 2019 at 3:45 pm #474379
I figured he’d take care of you. After he sent me a NEW regulator at NO CHARGE, I sent him an e-mail thanking him. Now that’s a guy who takes care of his customers.
ZonkSeptember 5, 2019 at 6:05 pm #474429
Yes, the way he takes care of his customers and products is exceptional.
This is why I made up my mind purchased the new Uragan.
I am already in loveSeptember 6, 2019 at 5:08 pm #478018
Let me know how it shoots. My buddy is looking at one right now, what caliber did you get?
ZonkSeptember 6, 2019 at 6:55 pm #478915
since the .25 is not allowed any more here in Saudi Arabia, I got the .22 and it is super accurate with the 18.13 gr
I tried to shoot the 25.39 redesigned, but I was not satisfied with accuracy.
It pushed them too slow I guess, 850 fps
yesterday, I took the gun apart and did some regulator tuning, she is pushing the 25.39 gr at 920 fps now.
Will test accuracy soon and will let you know.September 8, 2019 at 10:50 am #485483
Awesome! My Vulcan2, in 25 shoots 920 FPS and is deadly accurate. My Vulcan in 22 is around 890 FPS.September 25, 2019 at 1:21 pm #526981
here is the Uragan shooting the 25.39grOctober 25, 2019 at 10:37 am #529941
You nut cases keep saying he sent them to you free….idiots!
He sent me parts back “in the day” and I thought they were free, there was no bill in the envelope, but I later found out the invoice was taped behind the address label, and not inside the envelope. The next time I needed a part I got reamed out pretty good for never paying for the first part!!!
You guys, especially Zonk, are probably all on his shit list now, and don’t even know it.
Honestly, I leave here for a few months and you guys screw up our mfgr contact! No wonder he doesn’t like to respond. You’d better email him and ask what you owe if you expect any further parts. I say this because if he didn’t give ME free parts, he sure as hell isn’t going to treat you freeloaders any different! You didn’t look for the invoice in the right place.
There’s no need for thanks…helping people is what I live for!
Kindly ‘Ol Uncle Hoot
You must be logged in to reply to this topic.