Valve problems
Hi guys im having a problem with my valve the little white plastic end cap has worn its threads now ive lost it 🙁 can any one help?
Thanks people love you all. 🙂
All Replies
Viewing 14 replies - 1 through 14 (of 14 total)
Yes guess I spelled it wrong lol thanks
think he means delrin?
Im not sure as i dont know what that is 🙁 anyway thanks xx
Well I don’t have one of those valves so I can’t help much more IV seen them and held them but that’s it. This is a long shot but would a hiflo derling. Block the hole and then u can drill out the hole in the derling where it goes on the stem?
Thats the problem i dont have the piece and thats what i need now if it was made for one then i should fit all with out much of a problem but its gettjng one is the hard part ive tryed so many types of o ring plastic spaces and washers to fit. Got some to fit but not seal thats where im having the problem. So if i can get another one then i should fix all the problems and so i can use my rifle 🙂 xxxx love you all.
I’d imangen that if u got the plastic piece and drilled a hole close u country make it self tap. Or just go to a hard ware store and keep trying nuts until u find the right one. Or make it so you have your gap and just press it on.
I dont think they are m5 as a m5 nut doesnt fit
hi the threads m5 if i remember correctly pm sean on here im sure he will help hes a top bloke
Where are you located? I have a old one some where.
I beleive its a blodnob valve for some reason cant get a pic on ill try find a link http://talonairgun.com/forum/viewtopic.php?t=8649
What valve do u have?
Yes but mine was not stuck on screwed on can u help
White plastic ??? Do you mean the delrin (plastic) end that is the valve seat that is stuck on the end of the valve stem ?
Viewing 14 replies - 1 through 14 (of 14 total)
- You must be logged in to reply to this topic.
John just an idea but you will have to have the tools to do it or know someone that does! make a brass insert for your white piece which I am guessing is delrin, drill a hole so the brass piece you make fits and locktite it in, that is if you have enough room to do it! Not sure where you live but if you send it to me I can make you one for the cost of shipping no charge for making it! let me know thanks Eddie