Q:

Talon TopHat Opening Size

Question: What is the stock Talon/TalonSS valve opening diameter? You know the hole that the air comes out of on which the top hat is threaded…???

Thanks!! 8)

ANSWER IS ON LAST 2 POSTs… ➡

General Chat

All Replies

Viewing 5 replies - 1 through 5 (of 5 total)

😯 OK finally got it together to measure the damn tophat opening…

I’ll second the above measurement with 0.1094″ or 2.77mm, basically a 7/64″ drill bit slips in there with very little friction…

I measured it and got 2.74 mm.

Will do, looks like i’ll use a drill bit to get the right size…

I’m betting it will be the most accurate way, my calipers are just plastic jobbers and they are only good for about 0.1″… 😕

quote synopsys:

😯 You guys are going to make me measure it myself aren’t you… 😆

😈

After you measure it post it here 😛

😯 You guys are going to make me measure it myself aren’t you… 😆

😈

Viewing 5 replies - 1 through 5 (of 5 total)

  • You must be logged in to reply to this topic.