Still unclear, mounting a Harris…
I’ve got one on the way and I need to figure out how I’m going to mount it before it gets here.
Obviously I want Solid, but I also want it QD if at all possible.
Am I correct it comes with both stud and Barrel mounts?
I was thinking Swivel stud with dovetail but have read that for some reason that doesn’t work?
I don’t want to drill the forearm.
Ideas?
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
To get Vlady’s bipod installed, I took the straight sling swivel and threaded it 10-32. Then drilled and taped a hole in the bottom rail.
Sorry, no pics.
Tony
Yeah, I did what Adam described…
Except for the mount, I payed $1.99 on eBay (wouldn’t feel good sawing a good mount…).
Worked very nice… very solid!
This is how I would do it. I would buy this mount for $16 and mill, grind, file or whatever off the rings. Drill and tap the mount and put in a QD swivel stud. Then spray it black and mount it to the lower rail and put on the Harris Bipod. It would be rock solid and removable. Very custom setup for a few bucks.
Harris does work with a QD swivel stud.
http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=805
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
So basically drilling and taping the bottom rail for a swivel stud should work fine? No stripping the aluminum?
Thanks Anthony.