SS .25 Cal?

Home Forums AirForce Talon/Talon SS SS .25 Cal?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #1136
    saugus18
    Participant

    Since this gun changes barrels so easily, I figured I’d take advantage of this, and my first thought was to get a optional 24″ .22 barrel for when I’m places other than my dinky backyard for longer range shooting. Then I saw .25 cal barrels available as well, and figured why not just go there for even more range and power. Just wondering if there’s any breach mods (or any mods) that have to be done to do this? If so I’ll probably just stick with .22, but I’m hoping it pops right in and works just like the other barrels do.

    If it does work, I’m also wondering what velocites I could expect in .25. Right now I’m getting a 780/90 fps with a 22.1 grain Kodiak in the stock 12″ barrel… What might I get in let’s say a 24/26 grain .25 pellet from a 24″ barrel? Last but not least, where could one get a LW .25 barrel, with bushings. Tnx

    #30380
    anthony266
    Keymaster

    You can expect about 800fps with a 24″ .25 barrel shooting 31gr Kodiaks.
    It is a great combination.

    http://talonairgun.com/forum/viewtopic.php?t=1141

    You can expect approx. 15 fps per inch of barrel.

    I sell .25 barrels that drop in with no other mod.

    http://www.talontunes.com/page4.html

    #30386
    saugus18
    Participant

    Nailed every question Anthony, (and quite promptly I might add) thanks. You seem to be the go to man with these rifles, beautiful work by the way. 31 grains @ 800 fps sounds real good, and the barrel prices seems very reasonable as well. When the work checks start coming in again, I’ll be getting back to ya… cheers

    #30388
    dnc
    Participant

    with a valve mod, you could get it up to around 900.

    #30391
    nuglor
    Participant

    Tony, do you sell an 18 inch barrel in .25? I have a new shroud I would love to use on my TalonSS with it. 😆

    #30393
    anthony266
    Keymaster

    Your welcome Saug,,,

    Hey Nug,
    I can machine any size .25 barrel up to 23.8 inches.
    I really like 18-21 inches.
    Makes for a good handling rifle.

    Tony

    #30398
    nuglor
    Participant

    I need an 18″, but I don’t think it will work with the used shroud I just bought. (It’s one you made… bought it off the yellow forum).

    #30402
    anthony266
    Keymaster

    That looks like one of mine.
    But I never sold an un finished piece like that. Someone stripped the finish off.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.