Questions about which gun to order here

Home Forums AirForce Talon/Talon SS Questions about which gun to order here

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #758
    triggerman
    Participant

    I am trying to figure all equations here before ordering a new gun. Wanting a second AF rifle in .22 cal and looking for one to deliver top energy, but am not interested in the Condor gun. So, I am kicking around the Talon w/ 24″ barrel. I already have an SS but getting low 700 fps with it, plus it will be handed down to my son when I get the bigger better one.

    One question is, with this setup w/ 24″ barrel, what length of a shroud would be needed to fully enclose the barrel and what kind of fps does one of these guns produce out of the box?

    Second question, would there be any benefit to considering another SS ordered w/ 24″ barrel?

    Thanks for any input.

    Rick

    #27352
    j3magnum
    Participant

    my ss has a 24 inch barrel and a 12″ frame extension…no baffles it is as quite as a stock ss….i am shooting cp at 935 and kodiaks around 865…still thinking about a trading that 400 shoot me an e-mail… i have to ss now…might want to trade this one…. trigger done, tophat set, 50 gram hammer….shoot me an e-mail if you want…

    #27353
    bodhisdad
    Participant

    You’ll see about 150fps increase with a 24″ barrel. I’d put the money into a blodnob valve vs a 24″ barrel. It costs a little more for the valve, but you will still be compact and spitting kodiaks at over 900fps with a 12″ barrel. I had mine up to 43 fpe with eunjins. Waiting on a set of restrictors from Sean so i can continue testing some more this winter. Its either that or a TSS and high- flo/condor valve.

    #27354
    triggerman
    Participant

    I had some discussion a couple of weeks ago with somebody on here about the blodnob valve and they were supposed to shoot me contact info for the guy with these things, but never got it. Any idea how to contact whoever this is ?

    Also, if anyone has this valve, what does it look like and what goes into the install of one? Does it look anything similar to what the tanks have on them now (as far as tophat) or is the difference internal?

    #27355
    j3magnum
    Participant

    shoot me some info on that too…

    #27358
    collectric
    Participant
    #27359
    walkonking
    Participant

    Search for him in the member list here and send him a PM.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.