Polishing the barrel

Home Forums AirForce Talon/Talon SS Polishing the barrel

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #535
    johncedarhill
    Participant

    When I change out my front bushing is it a good idea to polish the breech end of the barrel. 600 paper or rouge polish? I don’t have any crocus cloth anymore. Get that part nice and shiny? I don’t recall where I read something along these lines.
    Thanks

    #25653
    anthony266
    Keymaster

    Yes John,
    It is a real good idea to polish the breech end of your barrel and remember to keep your breech orings well lubed with divers silicone.
    600 grit will work fine.

    #25656
    johncedarhill
    Participant

    Thanks

    #25658
    shadoh
    Participant

    How do you keep the polished barrels from rusting? Clear coat or just keep them lubed?

    #25659
    anthony266
    Keymaster

    It will not rust when coated with silicone.

    #25770
    walkonking
    Participant
    quote Anthony266:

    It will not rust when coated with silicone.

    Silicone is tenacious shit. It is almost impossible to totally remove. It is banned from anywere that paints because if it gets on the metal or wood the paint or finish will not stick to it.

    Good call Tony

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.