New valve test results!

Home Forums AirForce General Chat New valve test results!

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #241
    mm123521
    Participant

    21 grain Kodiak 1062 FPS for 53 Foot Pounds Energy!!!!
    28 grain Eunjin 970 FPS for 58 Foot Pounds Energy!!!!

    All with an 18 inch barrel!!
    All with stock talon SS hammer and spring!!
    I’ll admit it started with a 220 bar fill.

    Lend me your experience — HOW DOES THIS COMPAIR TO AIRFORCES CONDOR VALVE WITH AN 18 INCH BARREL??????

    YOU CAN FEEL THE RECOIL!!!!!!

    Mark — da valve builder

    #23695
    walkonking
    Participant

    I don’t have a Condor, but all I can say is WOW!

    #23696
    walkonking
    Participant

    Mark did you get in contact with Bodi? If not his is posting on the Straight shooters forum.

    #23697
    mm123521
    Participant

    CATCHING UP WITH BODI
    August 25 2007, 1:18 PM

    NO CANT SEEM TO CATCH UP WITH HIM.
    I HAVE HIS EMAIL AT WORK — BUT GOTTA WAIL TILL MONDAY

    I SENT HIM A VALVE TO TEST/EVALUATE, HE GOT IT ON WENDSDAY AND WAS
    GOING TO TRY IT THIS WEEKEND. THEN ALL THE BAD STUFF HAPPENED ON THE TOG AND HE GOT BANNED. I JUST NEED TO REESTABLISH CONTACT. LOOKS LIKE HE WILL NOT POST HERE, AND HE’S OUT OVER AT TOG.

    I HAD HIS EMAIL IN A PM ON THE TOG — BUT SOMEONE (WHO’S NAME WE SHALL NOT SPEAK) DELETED THE PM’S

    I’LL CATCH UP ON MONDAY, I HAVE HIS EMAIL FROM THE UPS DOCUMENTATION.

    THANKS

    gatlinggunmark@sbcglobal.net

    #23698
    Anonymous
    Inactive

    That is one nice valve. Could you please post a shot strings for those two pellest when you get a chance. Thnaks

    #23699
    mm123521
    Participant

    Randall:
    Good sugestion. I got a little more work to do. I know the power curve is not where I want it yet. I need to work on that issue.

    Dont worry I’ll post more strings than you wanna look at — this is my obsession. I cant even use this much power in the area that I shoot. I guess I saw what AF and other modders were doing, with heavy hammers, powerfull springs, and all and asked myself WHY? — there must be a better way.

    Mark

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.