NEW VALVE — DRAWINGS AND PICTURES

HERES MY NEW VALVE DESIGN.
IT HAS VERY GOOD POWER ADJUSTABILITY.
THIS VALVE OPENS EASILY WITH A STOCK TALON SS HAMMER & SPRING
THIS VALVE WILL EASILY TAKE A 220 BAR OVERFILL (NOT RECOMENDED!! – DANGEROUS), AND STILL OPERATE PERFECTLY.
I HAVE SEEN IT PRODUCE 1000FPS WITH 28 GRAIN PELLETS. THATS 62 FPE WITH AN 18 INCH .22 CAL BARREL.
I AM NOT SELLING THESE THINGS, BUT POSTING HERE IN THE HOPE THAT SOME OF THE VALVE BUILDERS OUT THERE CAN BENIFIT FROM MY WORK (EASILY OVER 150 HOURS INVESTED IN THIS PROJECT).
ALL THESE DIMENSIONS ARE THE BEST I HAVE (MOST CURRENT DESIGN), AND ARE THE RESULTS OF OVER 25 PROTOTYPE VALVES, AND THOUSANDS OF PELLETS TEST SHOT.
POWER ADUUSTS FROM 600FPS TO 1080 FPS WITH 21 GRAIN KODIAKS.

ENJOY!
MARK