Taipan Laminate airgunUragans airgun

New Taipan/ Veteran Is At TalonTunes

Home Forums BullPups Taipan Mutant/Veteran New Taipan/ Veteran Is At TalonTunes

This topic contains 21 replies, has 5 voices, and was last updated by  srairgunner 3 weeks, 1 day ago.

Viewing 7 posts - 16 through 22 (of 22 total)
  • Author
    Posts
  • #454678

    srairgunner
    Participant

    Tony I have the Taipan Veteran .25, I was doing a shot string after filling to 250 bar and on the 12th shot I felt a puff of air in my face, not sure what happened, checked the barrel no pellet, tried shooting another pellet same result. The pressure was down to about 170 bar. Tried finding schematic and parts listing; found only the mutant .22 schematic and no parts listing. Can you help me with this? First HP air gun little experience.

    #454872

    anthony266
    Keymaster

    Sure..
    Check to see if you have the breech o-ring..

    #455227

    srairgunner
    Participant

    There is a breech o-ring.

    #455243

    anthony266
    Keymaster

    Here is a pic of the breach o-ring you can also see one half of the dual transfer ports in the taipan veteran..

    #455245

    srairgunner
    Participant

    Not sure the o-ring is functioning correctly. Used a magnifier loop to insure the o-ring is in place, air ports visible.

    #455246

    anthony266
    Keymaster

    There should be a replacement o-ring in your accessory bag… I would go ahead and replace it..

    #455321

    srairgunner
    Participant

    I’ll give that a shot, thanks.

Viewing 7 posts - 16 through 22 (of 22 total)

You must be logged in to reply to this topic.

Skip to toolbar