New Condors – Any chrony and fill data with the new valve?
Interested in what kind of performance you guys are getting with the new Condor valve…accuracy, chrony string, fill pressure, which pellet is grouping best, etc….
Regards,
Tony
All Replies
Viewing 11 replies - 1 through 11 (of 11 total)
When I got my new tank from AF the top hat was set at 0.094″ and it was hitting dam hard with a stock hammer and 3000 psi fill. I only took about 20 shots with it before I tore it down.
Martin, is she all back together now?
When I got my new tank from AF the top hat was set at 0.094″ and it was hitting dam hard with a stock hammer and 3000 psi fill. I only took about 20 shots with it before I tore it down.
Well alllllrighty then. I’ll be waiting to see your write up on the .25. Congrats.
My rifle is in a hundred pieces right now. I’m stuffing in a .25 cal. barrel and other mods. 😯
When I got my new tank from AF the top hat was set at 0.094″ and it was hitting dam hard with a stock hammer and 3000 psi fill. I only took about 20 shots with it before I tore it down.
Hey Martin if you get a chance would you run some tests on some Kodiaks and various fill pressures? I know i will as soon as i order up some Kodiaks. I’m curious to see what your stock set up does with Kodiaks and a top hat setting of .070.
Looking at your numbers. There must be something wrong with mine. I think if A.F. tells me to send mine in I’m going to send them the scuba clamp so they can check it too or calibrate it. I know my clamp gauge is accurate after comparing it to my scuba shops gauge. They charge to 3000-3100 psi cold and when i fill that’s exactly where the gauge stops at. What do you all think????
Yep-I updated my data–>
http://talonairgun.com/forum/viewtopic.php?p=1741#1741
martin777
Can you turn down the power on that thing, to get it in the 950fps range?
Mark
New STOCK Condor data–>
http://talonairgun.com/forum/viewtopic.php?p=1741#1741
Here is some data I have.
http://talonairgun.com/forum/viewtopic.php?t=210
Sorry I started a new thread–brain fart 😳
Hi Tony,
We are waiting to get some shot strings on the new valve. All of guys who have received them are happy that they can fill to full 3000 psi. They now are achieving full velocity 1000fps + finally at full pressure.
Here is look inside. If you have an old Condor bottle they will replace the valve for $105
Viewing 11 replies - 1 through 11 (of 11 total)
- You must be logged in to reply to this topic.
Need to machine a front bushing for my pickle and optically center the scope. I gave the new barrel the JB barrel paste treatment. It sure shines now.