Skip to toolbar

My 1350 psi REG

Home Forums AirForce General Chat My 1350 psi REG

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #726
    sirjeigo
    Participant

    It works very well with my Airforce Condor CO2 adapter 🙂

    It shoots CP 10.5 gr .177 pellets at 860 fps and CP 14.3 gr .22 pellets at 840 fps. Not bad I think.

    #27153
    teflontron
    Participant

    Hah, that’s great. How many shots do you think that you’ll get?

    #27157
    sirjeigo
    Participant

    I haven’t been keeping count but I’m getting aprox 50+ shots per 3000 psi fill.

    I had great accuracy today…shooting out 100 to 120 yards and nailing pop cans hanging from trees. I used mostly .177 pellets too.

    #27159
    cw
    Participant

    Where’d you get that cool looking muzzle brake?
    Is it steel?

    #27209
    sirjeigo
    Participant
    quote cw:

    Where’d you get that cool looking muzzle brake?
    Is it steel?

    I got the RWS muzzle brake from MAC1

    #27239
    mcmike
    Participant
    quote sirjeigo:

    It works very well with my Airforce Condor CO2 adapter 🙂

    Very interesting application. I had that once in my mind but with regulator set to 150 bar and 300 bar on tank. Actually I still have that in my mind 😀

    btw, What laser is that? Any good?

    #27244
    sirjeigo
    Participant

    Im using the LS1 laser from Airforce. It works very well and can reach out to airplanes 🙂

    #27252
    voltar-1
    Participant
    quote sirjeigo:

    Im using the LS1 laser from Airforce. It works very well and can reach out to airplanes 🙂

    Joe, do you think that is funny somehow?

    we are approaching Veterans Day/ Remembrance Day and with fellows fighting to keep us safe a comment like this sure seems out of line to me

    Walter….

    #27257
    airgunner
    Participant

    Walter,
    I am sure that no-one on this site would mean anything negative like that…I am hoping that he was just using that line to inform us how ‘powerful’ that laser is…
    Thanks for remembering…I’m right there with ya bro!
    p

    #27262
    sirjeigo
    Participant

    I’m sorry if that last comment offended you, but I Airgunner said it best. I just wanted to describe how strong the laser reaches.

    #27284
    walkonking
    Participant

    Sirj,

    It was obvious what you meant and it was an innocent example. Dont sweat it.

    #27295
    djs987
    Participant

    How did you get 1350 psi output out of the tank, I have been around paintball for 10 years and all of the tanks are preset at around 850psi, that what I want to do with my talon with the co2 adaptor but didnt think velocity would be very good

    #27336
    sirjeigo
    Participant

    I bought a military regulator from someone that had a few remaining. I am really curious to know how this setup would work on a Talon SS. I’m sure it will work just fine because it doesnt require a heavy hammer to get consistent shots.

    #27446
    paulj
    Participant

    Sirjeigo,Are you still using the 1300 reg. with co2 adapter,is it still working out nice for you ,or did you switch back,sounds like a good idea,i can get HPA tanks filled a lot easier.

    #27456
    sirjeigo
    Participant

    I use both my 1350 psi reg with co2 adapter and condor tank whenever I go plinking.

    I enjoy using my 1350 psi reg because it’s very consistent and gives me plenty of shots. I can even fill it to 4500 psi with my CF tank.

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.