measurement for the Condor hammer spring?
Hope this is the correct place to ask this question.
Can and will someone give me the measurement for the Condor hammer spring?
Outside diameter, with spring uncompressed?
Wire diameter?
Coils per inch uncompressed?
Uncompressed length of the spring?
Thanks
Roy S.
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Here are the springs I ordered a while ago and several of them are AWSOME just a little more powerful to massively more powerful than stock… I don’t have them in front of me or I’d tell you my favorite.
The ones 6″ long get rid of the power wheel and there are some benefits to this…
These are all from http://www.centuryspring.com
Stock Number: 11486; Description: COMP O= .968,L= 4.09,W= .080;
Quantity: 2; Unit Cost: $2.52; Extended Cost: $5.04
Stock Number: 11640; Description: COMP O= .968,L= 4.38,W= .080;
Quantity: 1; Unit Cost: $2.73; Extended Cost: $2.73
Stock Number: 4149; Description: COMP O= .938,L= 6.00,W= .092;
Quantity: 1; Unit Cost: $4.26; Extended Cost: $4.26
Stock Number: 11615; Description: COMP O=1.000,L= 4.19,W= .090;
Quantity: 1; Unit Cost: $2.99; Extended Cost: $2.99
Stock Number: 2843; Description: COMP O= .938,L= 5.13,W= .087;
Quantity: 1; Unit Cost: $3.22; Extended Cost: $3.22
Stock Number: 4342; Description: COMP O= .938,L= 5.00,W= .098;
Quantity: 1; Unit Cost: $3.20; Extended Cost: $3.20
Stock Number: 72393; Description: COMP O= .975,L= 4.00,W= .085;
Quantity: 1; Unit Cost: $9.25; Extended Cost: $9.25
==============================
Subtotal: $30.69
Sales Tax: $0.00
——————————
Grand Total: $30.69
More later I need to sleep, Jim.[/url]
Benzin I had read that post and still have no idea what it says about springs.
I have never seen a catalog list springs to the specs. shown there.
Maybe it’s just me, but if someone could help me I’d appreciate.
An example it says 10# if the 10# means load at a compression, at what compression, per mm, per cm, uncompressed.
I just think someone left out info, like what is the ID, what is the OD, what is the free length.
Benzin thanks again.
Roy S.
Hi!, i think its the same as in the Talon.
You can find information about it here…
http://talonairgun.com/forum/viewtopic.php?t=21
HTH.
I need the dimensions because I have never seen a Airforce gun.
I’m collectiong parts to build a .308 from scratch (patterened after the Airforce concept) and having some basic info. will possibly save me some errors.
Thanks again.
Roy S.
Hmm… I cant help you at the moment as I’m at work. I think guys have refered to them as a 10lb spring in the past and I know its 1″ OD to fit in the frame.
If it helps.. its the exact same spring in the SS (Just figured I’d mention that incase you have an SS and were wanting to change it to a Condor).
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Blackops, thanks for the information.
Roy S.