Length vs Girth
Has anyone experimented with, or have knowledge of, a Moderator design that is quite short but has a large circumference? A Condor with a shroud is way too long for my tastes, so I was wondering whether a similar efficiency could be achieved with a can that is fat and stubby.
All Replies
I’m used to it by now WOK. A pretty wife and guys eye balling her is a given.. I just give them look of my own, and for being 38 i’m still in pretty good shape. Their eyes usually avert to something else, it bugs me less the older we get. She looks pretty good for just turning 36 😆 though doesn’t she.
Ooops…she is in the data bank now!
Can you imagine the horrible things Dirty Harry and Lama are thinking about right now?
Heres my toothy friend.
Good thing you and your big “friend” took care of those bothersome teeth!
Who do you think your talking to Lama? I know where the dam tube goes 😛 My wife is the one who has a problem of teeth. 😉
Adam, does that work for you?? 😛 I don’t see any room for enlargement on my behalf 😆 .
It’s not suppose to go on your mouth!
😛 😛 😛 😛 😛 😛
It was inevitable, but the orca post will never die.
Adam, does that work for you?? 😛 I don’t see any room for enlargement on my behalf 😆 .
I knew it was COMING…..LOL 😆 😆
Adam would want both 😆 :P. Did you see Orca?
Oh you are going to get it now….LOL
Length VS. Girth?….well since you beg for either depending on your mood, you can now have your cock and eat it too….LOL 😆 😆 😆 😆
Tron, I think this is one hell of a setup. This Idea could be modded and closed up to make things quiet. Can’t remember who’s it is?
Adam would want both 😆 :P. Did you see Orca?
Oh man did I. That was hell of funny 😆 😆
Adam would want both 😆 :P. Did you see Orca?
Tron, check out wikpedia on firearm silencers lots of informative info. From what we know 6″ beyond the end of barrel works fine at 1″ ID or so. What about 4″ at 2″ ID its the same volume A spacer in front of the barrel vented will make use of the frames rear empty space.
Heres an idea i have, get 1″ OD ali tubing slide that all the way back to the front bushing and have it extend to the point you want the LDC to end at, 4″ infront of barrel. In that tube use a plastic/urethane bushing with holes drilled into it similar to a vented bushing. This goes in front of the barrel, both to let air escape rearward and to protect the crown from the metal mesh (hardware cloth) Wrap hardware cloth around a dowel 5/16″ and use these as baffles. I see these as the same as the hair curlers fund in some Ag LDCs. In your case 1″ and 1.5″ strips should do. Fill to the top of 1″ tubeing spaceing out the wire mesh with felt washer, or urethane bushings. I’d drill the body of the 1″ tube where the 4″Lx2″W LDC will sit. This will help more air escape into the big empty 2″W tube.Then you’ll need a pair of spacers 1″ id to go over the ali tube and the OD will be determined by the 4″x2″ can you slide over the 1″ ali tubing and spacers you installed, some kind of 2″ endcap and you’ll be quiet as a mouse. I don’t see why you couldn’t use 2″od PVC as the end can, as all alignement is determined by the 1″ ali tube. It should look dam sweet being 1″W and then 2″W at the end. Almost 2 LDCs in one. Check out my link if you haven’t, read about the material involved. I did alot of searching yesterday and i can see a setup like this working for you. Tony could whip something like this up if he can work with 2″W round stock. Thing would look like a big bull barrel with a short 2″ ldc on it. Let me know if this was any help.
ROFLMAO ….thats like a city ghillie for a gun !
- You must be logged in to reply to this topic.
Why don’t you just put a sign on your back saying “Kick Me”?
Nice hardware Prince Albert