Is Scope Too High

When I purchased my Talon SS last month I had them install the high scope mounts………..then I decided to put the Trirail on to try to compensate for the uncomfortable shooting position that Air Force guns have.

Now I think my scope is to high because I can’t make an accurate shot inside 10 yds.

What scope rings should I get…………I have a Centerpoint 3 x 9 x 50 1″ scope

Thanks 😀

Optics/Nightvision

All Replies

Viewing 4 replies - 1 through 4 (of 4 total)

walkonking

Participant

November 7, 2007 at 5:46 am

Make your own would be better. Make sure it is thick to hold kodiaks.

shaky

Participant

November 7, 2007 at 4:49 am

You can find the pellet holder at http://www.pelletholder.com. It’s rather expensive for what it is. You might try a search for pelletholder within this site. However, you can make your own, that will save you some cash. All you need is a segment from a shower tong, a couple of velcro strips, and a hard plastic backing of some kind. Drill the holes to correspond to the size pellets you use,…..and badda-bing-badda-bang……you have a pellet holder. You can make it as big or as small as you want.

😀 😀

benfishin2day

Participant

November 3, 2007 at 4:57 pm

thanks Adam………Awesome looking rig

I need to get on of those pellet holders…………where did you get yours??

walkonking

Participant

November 3, 2007 at 4:52 pm

Take a look at mine. Basically the same set up and shooting at 10 yds is not a problem. Maybe a little shim on back mount might help.

Viewing 4 replies - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.