How many of you have Uragan on here

Home Forums BullPups Vulcan How many of you have Uragan on here

Tagged: ,

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #536343
    eelect
    Participant

    I got into pesting again after a long time off. Still have my same guns and everything. My boys are growing up and got into airgunning again

    So I end up testing some slugs in vulcan 25. 34 grain varmint knockers. Got it shooting very good However I am spending alot of time filling my tank. I hardly get 20 shots on a fill. Does anyone here shoot slugs with their Uragan.

    #536344
    zonk
    Participant

    Eelect, did you get my replies about reg?

    Zonk

    #536346
    eelect
    Participant

    No I didn’t get any message

    #536347
    Derek M
    Participant

    Looking into slugs for 25 uragan currently

    hopefully we will see replies

    #536348
    eelect
    Participant

    Varmint knockers work good on my gen one. Had to quit because I don’t have a big enough air tube for the 34 grain. Barks like crazy but not really a problem for me

    IMG_20210126_023822100 yard 5 shot groups. If my regulator worked better they would be tighter.

     

    #536349
    eelect
    Participant

    Sparrow at 80 yards with slug

    IMG_20210106_165911

    #536350
    eelect
    Participant

    <p style=”text-align: left;”>Pigeons absolutely do NOT take off anywhere after getting slugged either. They are absolutely devistating.</p>

    #536484
    eelect
    Participant

    Getting close to target accuracy

    Varmint knockers 32.9 G at 920 with Uragan

    42286IMG_20210401_020510IMG_20210401_020702

    #536485
    zonk
    Participant

    Very nice! Did you open up the reg a little or did you leave it where I set it at?

    Zonk

    #536486
    eelect
    Participant

    I ended up putting a huma regulator in set to 148 that gave me 930 up from 920. I don’t know what the factory one is set at. I’d really like to know. The factory reg had creep and I figured just get some extra plenom space and get the huma. Factory regulator was very consistent after the 2 first shots. My goal was 935-940 but there is very little wrong with these groups. I haven’t checked the group yet with huma regulator yet. At this point the hammer is maxed out and I’d like to back it off and still be at 930 somewhere. See how it goes.

    #536487
    zonk
    Participant

    If you’d like to buy my Huma Reg tester let me know

    Zonk

    #536489
    zonk
    Participant

    When I bought my Huma reg the site asked what Bar would you like it set at.
    I had them set it at 135 Bar.

    Zonk

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.