Skip to toolbar

Hello and a question

Home Forums AirForce General Chat Hello and a question

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #1452
    ac-rhino
    Participant

    I’m new to airguns (I have a 2250XT modded as a starter) but I’m not new to firearms. Since I’ve been getting into airguns more, I’m really starting to look at some of these talons. I’m interested in a high power and very quiet talon airgun for pests and such around my property. My questions is, can you folks in the know point me in the direction of a experienced talon airgun smith or a good place to buy? Odds are I’m going to want something more on the custom side.

    Thanks folks.

    #33080
    teflontron
    Participant

    Hello Rhino.

    If you want something done off the shelf with all of the work done for you then you can try http://www.talontunes.com as a good place to start. Tony is well-known, reliable and friendly. However, depending on what it is that you want, some of the work can be done by yourself or a local and knowledgeable gunsmith.

    #33081
    ac-rhino
    Participant

    Thanks, Talon Tunes was the only place I’ve found on my own, I sent him an e-mail and should I assume hear back in a few days. Talon stuff seems to be more low key as far as smiths than other gun types.

    #33083
    teflontron
    Participant

    Tony (the guy at TalonTunes) posts here too, so you may get a direct reply from him here.

    #33087
    walkonking
    Participant

    Depending on what you want Airhog and Mac1 work with the Airforce guns.

    Talon Tunes is one of us here and we know him well. But as Tron has said. Some things you can do yourself and that is what this site is for.

    If you have any questions feel free to ask here.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.