Q:

Green lasers on Ebay

Looking at the green lasers on Ebay coming from the land of China, description says they fit weaver/picatinny mounts or 20mm. That won’t fit these talons will it? I was thinking the rails are something like 11mm or somewhere around there.

Optics/Nightvision

All Replies

Viewing 5 replies - 1 through 5 (of 5 total)

If you are talking about this Ebay item # 280180979387, I purchased one about 2 years ago. It is still working.

I did not pay that much, guess the prices have gone up, but it was from the same vendor.

As a side note, I purchased two watt meters (for my camper) from another vendor out of China, when rec’d one stopped working. Stupid me wired it wrong, I explained how I wired it to the vendor and they said, bummer and sent me a replacement for free, with better instructions.

So much for that.

Roy S.

That is why I would spend the $150 for this one…
http://www.sportsmansguide.com/net/cb/cb.aspx?a=359327

If something goes wrong they are in the U.S. !

If you’re referring to the LXGD green dot laser – I purchased two of these. The mount supplied will fit 20mm rails. If you want to use it on the Talon, you will need an adapter. The quality of the laser is rubbish. One did not work at all. The other’s switch works intermittently. I’d stear clear of these especially if you get a bad one and have to send it back to China – good luck with that!

The ones I saw were just 1″ rings (25mm). Just replace the Weaver with the right ring for 11mm

Check out ebay…had UTG adapter rails from groved .22 receivers to weaver type. Might do the trick.

Viewing 5 replies - 1 through 5 (of 5 total)

  • You must be logged in to reply to this topic.