Taipan Laminate airgunUragans airgun

Fx impact

Home Forums BullPups FX Bullpups Fx impact

This topic contains 3 replies, has 2 voices, and was last updated by  kris 8 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #23509

    adham
    Member

    Hi to all… can anyone please tell me the best regulator and power setting for both .177 and .22 .

    Much appreciated

    #276759

    kris
    Participant

    you have to tune it no? :rofl:
    it is pointless to give you any number as the gauges are 50% off
    plus you did not give us your power requirement.
    the reg is evidently problematic, if set too low bad, if set too high also bad. so go figure

    just remember if your setup is very unbalanced, what you will have is POI moving around along the fill. on AGN they dont tell you that huh

    #276775

    adham
    Member

    Thanks Kris… power required is around 900 fps for .177 and around 880 for .22 .

    Best regards and happy holidays

    #276825

    kris
    Participant

    100 bar for .177 and 120bar or lower, depends on how heavy projectiles you want to use, if heavy it my need to go higher.

    definitely dont use the valve adjuster, so just let it wide open, rely on the hpa to close the valve, or you smash things up

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Skip to toolbar