finished valves

Well thats the Crimbo’ hol’s gone. 😥

But i did get a bit done. Started out to make 20 valves. After a few f**k ups i ended up with about 17 in the end. (If you’ve never do anything wrong, its because you’ve never done anything)
I’ll use the failed bodys to make a few 9mm setups.
Sold a few to local lads and have 9 or 10 left.
I even made a pressure checker to test that they seal ok.
If its OK with the mods i’ll advertise em on the for sale section.

Had time to start an FX bullpup too. I’ll put it on this thread cos am to lazy to start another thread 😳

Its got a titanium cylinder conversion as the chap wants it lightweight.
I’ll put a few more detailed pics up on the bullpup section.

And just for fun i been making Theoben regs.
These are the brass cores. I put a hex’ key hole in instead of the hacksawed slot for the screwdriver.

I got laid off work last week so i may have to start and do this just to pay a few bills so i’ll probly be making a noosance of my self on here for a while.
May be the nudge i need ❓
Anyhoo.
Its me bed time now.
Later all.