I finally got to test my AF condor with shroud and updated valve yesterday and was very impressed. First of all, the shroud from Tony makes this gun VERY quiet. I went hunting and used MCM’s as my ammo. The gun was so quiet that even when I missed a bird they didn’t fly away, they just flew to another branch. One bird I hit square in the chest and it blew him into 3 pieces! The top half of his body, one wing, and the lower half of his body was separated lying on the ground. Tony makes an excellent shroud and is well worth every penny. Now on to the updated AF valve. This valve is much more consistent and also provides more shots from a fill than the old valve. On power level 6, I was getting about 40 shots before the POI began to drop, compared to about 25-30 shots with the old valve. The ending PSI of the new valve after 40 shots was 2100 PSI from a fill of 2900 PSI, compared to 1800 PSI from a 2900 PSI fill with the old valve. Not sure if the velocity is higher or not as my chronograph has stopped working, but velocity seems a little bit higher. The condor is my favorite rifle to shoot because of how quiet it is, its power level, and accuracy at long distances.