Taipan Laminate airgunUragans airgun

Complete Oring List

Home Forums BullPups EdGun Complete Oring List

This topic contains 64 replies, has 26 voices, and was last updated by  airbrained 1 year, 1 month ago.

Viewing 15 posts - 46 through 60 (of 65 total)
  • Author
    Posts
  • #241466

    charlie101
    Member

    Does anyone know the complete O-ring list for Lelya .177 and other calibers?

    or who sells the complete o-ring kits for Matador .25 and lelya .177? And Transfer port brass o-ring?

    #260362

    piterm
    Member
    quote charlie101:

    Does anyone know the complete O-ring list for Lelya .177 and other calibers?

    Yes please!!! Lelya pellet seater/breach for .22 please. Just had to replace both of them and now I’m with ZERO backup left :/

    #260366

    wingman-nz
    Member
    quote PiterM:

    Yes please!!! Lelya pellet seater/breach for .22 please. Just had to replace both of them and now I’m with ZERO backup left :/

    .22 probe is 3×1 N70
    Ill do a full list up when I get a chance

    #263674

    wingman-nz
    Member

    All Edgun O rings are best replaced with Nitrile-70 compound and lubed with 100% silicone grease.
    O rings are measured in millimeters first by the internal diameter and secondly by the cross section thickness.
    All O rings in Edgun are metric sizes apart from the 2.57 х 1.78 (005) used in the fill valve and R3M Cam tensioner.

    Leshiy O rings

    2.57 х 1.78 (005) -1pc fill valve
    5 х 2.5 -1pc Manometer
    5 х 1.5 – 4pc Fill probe, Regulator piston and Regulator adjuster screw
    8.5 х 2.5 – 1pc Breech
    9 х 1.5 – 1pc Regulator piston
    12 х 2.5 – 1pc Regulator to plenum
    18 х 2 -1pc Regulator plenum to valve body
    18 х 3 – 2pcs Rear cylinder plug and outer regulator
    29 х 1.5 – 2pcs stock magnet collar
    29 х 2 – 1pc Moderator end cap

    Lelya O Rings

    2.57 х 1.78 (005) -1pc fill valve
    5 х 2.5 – 1pc Manometer
    5 х 1.5 – 4pcs Fill probe, Regulator adjuster screw, Regulator piston
    2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – 2x Breech
    9 х 1.5 – 1pc Regulator piston
    18 х 3 – 4pcs Regulator, valve body and cylinder front plug
    19 х 2 – 1pc Moderator

    Veles O rings

    2.57 х 1.78 (005) -1pc fill valve
    5 х 2.5 – 1pc Manometer
    5 х 1.5 – 4pcs Fill probe, Regulator adjuster screw, Regulator piston
    2.5 x 1 (.177) 3 x 1(.22) – 2pcs Breech pellet probe
    9 х 1.5 – 1pc Regulator piston
    18 х 3 – 4pcs Regulator, valve body and cylinder front plug

    Matador R2.5 O rings

    2,57 х 1,78 (005) – 1 pc (front plug filling valve)
    2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – R2.5 and R3 Pellet probe
    9 х 1.5 – 1 pc Rear of the regulator piston
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer port, x1, fill probe x2
    7 x 1.5 – 1pc Barrel to breech

    Matador R3 O rings

    2,57 х 1,78 (005) – 1 pc Front plug filling valve
    2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) 5.1 X 1.6 mm or 008 (.30 Gen 1) – Pellet probe
    7 х 1.5 – 1 pc Gen 2 .30cal breech
    20 х 3 – 1 pc Gen 1 .30cal front regulator body
    9 х 1.5 – 1 pc Rear of the regulator piston
    19 х 2 – 1 pc Suppressor seal
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2

    Matador R3M O rings

    2,57 х 1,78 (005) – 2 pcs (front plug filling valve x1, R3M mag indexing cam tensioner x1)
    5.1 х 1.6 – 1 pc for .22cal – 6 x 1.6 for .25cal R3M Breech to pellet probe
    9 х 1.5 – 1 pc Rear of the regulator piston
    19 х 2 – 1 pc Suppressor seal
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    22 х 1.5 – 2 pcs (per mag) R3M multi-shot mags
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2

    Morana O rings

    2,57 х 1,78 (005) – 2 pcs (front plug filling valve x1, multishot mag indexing cam tensioner x1)
    5.1 х 1.6 – 1 pc for .22cal – 6 x 1.6 for .25cal – multishot breech to pellet probe
    2.5 x 1 – 2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – single shot Pellet probe
    9 х 1.5 – 1 pc Rear of the regulator piston
    19 х 2 – 1 pc Suppressor seal (non escentric)
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    22 х 1.5 – 2 pcs (per mag) R3M multi-shot mags
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 4 pcs Front of the regulator piston x1, regulator adjustment screw x1, fill probe x2

    #263686

    junior
    Member

    Rear regulator piston of the Lelya and Veles is 8 x 2.5?

    #263689

    wingman-nz
    Member

    No, 8 x 1.5
    I fixed the typo.
    Thanks

    #263710

    bf1956
    Member

    Is there a list for the 2.5 ss ?

    #263722

    wingman-nz
    Member
    quote bf1956:

    Is there a list for the 2.5 ss ?

    Yes, I have added it to OP

    Cheers

    #272148

    gku
    Participant

    Hum, no O-rings came with my Lelya 20 cal ….. anyone know what the size is for the pellet probe ?

    Without taking it apart my guesstimate would be, 1mm X 2.7mm (Buna-N 70 or 90) ?

    update:
    Same as the 22 cal the .20 cal are 3mm x 1mm, A90

    22 х 2 – 1pc Offset Moderator.

    ~ Thanks, Greg

    #272597

    gku
    Participant

    .

    30 x 2mm – Offset Suppressor seal Matador R3M

    ~ Greg

    #273323

    halil
    Member

    Hello,
    Does anyone know size of the transfer port brass ring?

    Kind Regards
    Halil

    #273330

    charlie101
    Member
    quote Wingman NZ:

    All Edgun O rings are best replaced with Nitrile-70 compound and lubed with 100% silicone grease.
    O rings are measured in millimeters first by the internal diameter and secondly by the cross section thickness.
    All O rings in Edgun are metric sizes apart from the 2.57 х 1.78 (005) used in the fill valve and R3M Cam tensioner.

    Leshiy O rings

    2.57 х 1.78 (005) -1pc fill valve
    5 х 2.5 -1pc Manometer
    5 х 1.5 – 4pc Fill probe, Regulator piston and Regulator adjuster screw
    8.5 х 2.5 – 1pc Breech
    9 х 1.5 – 1pc Regulator piston
    12 х 2.5 – 1pc Regulator to plenum
    18 х 2 -1pc Regulator plenum to valve body
    18 х 3 – 2pcs Rear cylinder plug and outer regulator
    29 х 1.5 – 2pcs stock magnet collar
    29 х 2 – 1pc Moderator end cap

    Lelya O Rings

    2.57 х 1.78 (005) -1pc fill valve
    5 х 2.5 – 1pc Manometer
    5 х 1.5 – 4pcs Fill probe, Regulator adjuster screw, Regulator piston
    2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – 2x Breech
    9 х 1.5 – 1pc Regulator piston
    18 х 3 – 4pcs Regulator, valve body and cylinder front plug
    19 х 2 – 1pc Moderator

    Veles O rings

    2.57 х 1.78 (005) -1pc fill valve
    5 х 2.5 – 1pc Manometer
    5 х 1.5 – 4pcs Fill probe, Regulator adjuster screw, Regulator piston
    2.5 x 1 (.177) 3 x 1(.22) – 2pcs Breech pellet probe
    9 х 1.5 – 1pc Regulator piston
    18 х 3 – 4pcs Regulator, valve body and cylinder front plug

    Matador R2.5 O rings

    2,57 х 1,78 (005) – 1 pc (front plug filling valve)
    2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – R2.5 and R3 Pellet probe
    9 х 1.5 – 1 pc Rear of the regulator piston
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer port, x1, fill probe x2
    7 x 1.5 – 1pc Barrel to breech

    Matador R3 O rings

    2,57 х 1,78 (005) – 1 pc Front plug filling valve
    2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) 5.1 X 1.6 mm or 008 (.30 Gen 1) – Pellet probe
    7 х 1.5 – 1 pc Gen 2 .30cal breech
    20 х 3 – 1 pc Gen 1 .30cal front regulator body
    9 х 1.5 – 1 pc Rear of the regulator piston
    19 х 2 – 1 pc Suppressor seal
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2

    Matador R3M O rings

    2,57 х 1,78 (005) – 2 pcs (front plug filling valve x1, R3M mag indexing cam tensioner x1)
    5.1 х 1.6 – 1 pc for .22cal – 6 x 1.6 for .25cal R3M Breech to pellet probe
    9 х 1.5 – 1 pc Rear of the regulator piston
    19 х 2 – 1 pc Suppressor seal
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    22 х 1.5 – 2 pcs (per mag) R3M multi-shot mags
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2

    Morana O rings

    2,57 х 1,78 (005) – 2 pcs (front plug filling valve x1, multishot mag indexing cam tensioner x1)
    5.1 х 1.6 – 1 pc for .22cal – 6 x 1.6 for .25cal – multishot breech to pellet probe
    2.5 x 1 – 2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – single shot Pellet probe
    9 х 1.5 – 1 pc Rear of the regulator piston
    19 х 2 – 1 pc Suppressor seal (non escentric)
    25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
    22 х 1.5 – 2 pcs (per mag) R3M multi-shot mags
    5 х 2.5 – 1 pc Pressure gauge
    5 х 1.5 – 4 pcs Front of the regulator piston x1, regulator adjustment screw x1, fill probe x2

    Hi Wingman,

    Is the Rear of the regulator piston is 8×1.5 or 9×1.5? Toshi said 8×1.5, yours is 9×1.5, or both work?

    Thanks

    Charlie

    #274957

    jwilson
    Member

    Time to update for the R5 series.

    I have the .25 R5M Long

    Transfer Port ORing is 8mm X 2.5mm
    The breech ORing is 6mm X 3mm

    #275120

    leon83
    Member

    Does anybody know what is the size of Huma Air reg o-rings for Leshiy?

    #275122

    gku
    Participant
    quote Leon83:

    Does anybody know what is the size of Huma Air reg o-rings for Leshiy?

    If no one replies I’d contact Brian at EdGun West, he would be the real man for that info and everthing EdGun !

    Also, https://www.huma-air.com/Rebuild-kit-Huma-regulator

    – Greg

Viewing 15 posts - 46 through 60 (of 65 total)

You must be logged in to reply to this topic.

Skip to toolbar