Skip to toolbar

CAD file of hammer slide

Home Forums General Mods/Machinists CAD file of hammer slide

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #814
    colinb
    Participant

    just had a quick play and thought id knock up a cad file for the hammer slide

    should make it easyer for anyone who wants it machining by sombody with a CNC setup

    id appreciate if somebody could just double check the measurements on the tapered part for me im not used to working with inches and im not sure if iv read the drawing 100% correct

    file format is in IGES and solidworks 07 (if you need it in any other format let me know)

    the file is hosted here http://savefile.com/projects/808566994
    ill have to sort out my proper web server and host it properly when i get chance

    if anyone has other parts for the gunpower stuff they would like doing in CAD then they can send me the drawings or even the parts themselves and ill do so, also these files are public domain so you can do as you please, altho i imagine gunpower/air force own the copy write on the actual part in this case

    Enjoy 😀

    #27816
    colinb
    Participant

    drawing i used

    #27820
    walkonking
    Participant

    I could not get it to open

    #27826
    colinb
    Participant

    what file did you try and open?

    i know the iges file is deffo ok as i opened it in the CAM software i use at work

    #27847
    sniper782
    Participant

    Was gonna try it in SW07 but I can´t download it… 😕

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.