Skip to toolbar
Taipan Laminate airgunUragans airgun

Bullpups…….

Home Forums General TAF Gallery Bullpups…….

Viewing 15 posts - 16 through 30 (of 127 total)
  • Author
    Posts
  • #186681
    foxback
    Participant

    #212581
    foxback
    Participant

    #213204
    foxback
    Participant

    P-rod double air tube bullpup:


    Did a make over on my bullpup.
    New stock black sprayed fine textured paint.
    She 20 inches long, other mods were .118 port, two o-ring on the valve face, drilled out air striper holes bigger.

    Played with the setting of the power.

    This maybe helpful for anyone wanting a twin air tube for their p-rod.
    Even if you don’t run it as a bullpup. My extra tube is I think 10 inches long.
    I want not too add any too the length of the gun, but just too get more shots & power.

    The gun can be set up from:
    65- shots @ 14 fpe
    50- shots @ 17 fpe
    24- shots @ 20 fpe
    It is a flexible set up.

    As of now I’m running her 50 shots @ 17 fpe.
    My goal was getting the most fpe from her at 50 shots.
    Thinking that was a balance of power and shots.

    #215206
    foxback
    Participant

    Made a few changes on my p-rod pup, same power setting 17fpe for 50 shots.

    #215208
    genet
    Participant

    How are you handling the trigger linkage? Is the ‘pup trigger close to as good as the standard? Seems like that’s the biggest hurdle. Also, what’s that stock in your most recent pic?

    TIA,

    GsT

    #215212
    foxback
    Participant

    yes very happy with the trigger, i’m using a m-rod trigger pack.
    i can adjust it, and i can adjust the rod between the first and 2nd trigger also.
    so it’s very light.

    the stock is my latest build just finshed it 😀

    #215727
    foxback
    Participant

    I think I found the best power with shots combo for my p-rod twin tube bullpup:
    New power tune using crosman 14. 3 pellets 202 bar fill two o-rings on the valve face,
    No drilling the transport opening, just a .118 size port, nothing else done at all.

    1 798- 20 fpe
    2 806- 20 fpe
    3 810- 20 fpe
    4 811- 20 fpe
    5 819 – 21 fpe
    6 825- 21 fpe
    7 827- 21 fpe
    8 832- 21 fpe
    9 841- 22 fpe
    10 839- 22 fpe
    11 843- 22 fpe
    12 848- 22 fpe
    13 855- 23 fpe
    14 854- 23 fpe
    15 864- 23 fpe
    16 860- 23 fpe
    17 845- 22 fpe
    18 841- 22 fpe
    19 843- 22 fpe
    20 845- 22 fpe
    21 847- 22 fpe
    22 847- 22 fpe
    23 845 -22 fpe
    24 844- 22 fpe
    25 850- 22 fpe
    26 849- 22 fpe
    27 843- 22 fpe
    28 838- 22 fpe
    29 836- 22 fpe
    30 826- 21 fpe
    31 823- 21 fpe
    32 825- 21 fpe
    33 830- 21 fpe
    34 825- 21 fpe
    35 823- 21 fpe
    36 819- 21 fpe
    37 816- 21 fpe
    38 799- 20 fpe
    39 795- 20 fpe
    40 797- 20 fpe

    #216107
    Anonymous
    Inactive

    Very nice work Foxback, awesome pups !

    ~ GKU

    #216207
    foxback
    Participant

    thx as you can see I have a thing for bullpups.

    #221855
    foxback
    Participant

    The lastest puppy for the page: ~THE VULCAN 22.


    #231325
    foxback
    Participant

    #231403
    rrdstarr
    Participant

    Nicely done Foxback! Where are you getting your wood from?

    You don’t have an obsession, you have a nice collection!

    #231473
    foxback
    Participant

    thx, had a place by me for wood.
    but they closed shop on me, got some on line as well. :mrgreen:

    #233318
    foxback
    Participant

    The very first p-rod bullpup ever made, before I stained her :biggrinn:

    #234318
    foxback
    Participant

Viewing 15 posts - 16 through 30 (of 127 total)
  • You must be logged in to reply to this topic.