Taipan Laminate airgunUragans airgun

BBT in escape

Home Forums AirForce Escape/ Escape SS/ Escape UL BBT in escape

This topic contains 1 reply, has 1 voice, and was last updated by  rrdstarr 2 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #22259


    I have been shooting the 41 gr bbt with 250/252 band, lubed with bike wax. ave FPS is 866 and groups are less then 3/8 at 25 yards from support standing. When it hits a critter it knocks em a$$ over tea kettle. It did not shoot the 51 gr well though. It needs a firm push into chamber, I use the flat side of my pocket knife to push in place, it snaps into battery. Casts easy. Use soft lead. Might try a harder mix when weather breaks.



    Stay less then 5% anitmony, most lead is.
    You may need to extend the leade in your rifle to fit the longer bullets. Also no need for wax as long as you are subsonic.

    I need to cast up some .300 calibre round ball to try out!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Skip to toolbar