airforce bipod swivel

Home Forums AirForce General Chat airforce bipod swivel

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #882
    sirjeigo
    Participant

    Does anyone have any problems with it? Mine has a crack starting to form…perhaps from tightening it too much.

    #28262
    synopsys
    Participant

    I think mine is a piece of cr@p and it is just waiting to break… I did see a photo of an early version where the clamp was about 1.5″ wide and the bipod was attached to the bottom of the dovetail and not to the side…

    I was going to use a dovetail to weaver and get a real bipod…

    http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=601 😉

    #28263
    walkonking
    Participant

    Mine is fine but I use it mainly for standing the gun up. Other then that I shoot freehand or off a camera tripod.

    #28264
    sacshooter
    Participant
    quote synopsys:

    I think mine is a piece of cr@p and it is just waiting to break… I did see a photo of an early version where the clamp was about 1.5″ wide and the bipod was attached to the bottom of the dovetail and not to the side…

    I was going to use a dovetail to weaver and get a real bipod…

    http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=601 😉

    this is another dovetail to weaver:

    Kwik-Site .22 Adapter Two-Piece Base:

    Link here

    it is two piece, but only $19.95 I was thinkig about getting a set

    #28267
    mr-lama
    Participant

    Put a swivel stud in the forearm and get a harris. 🙂

    #28272
    akula
    Participant

    I second Llama’s idea. It’s the cleanest solution to the dovetail to Weaver problem. AKULA

    #28284
    synopsys
    Participant
    quote Mr-lama:

    Put a swivel stud in the forearm and get a harris. 🙂

    I want to put a foldable handle there… 😆

    So many idea so little time…. 🙄

    #28285
    squirrelsbegone
    Participant

    I wanted a Bipod to use as a stand for my .25 AirHog Condor. I about had a heart attack when I saw the price of the Air Force Bipod. I bought the items below.

    Kwik-Site .22 Adapter Base Item:IH-711575 = $10.99 Cabelas

    Leapers – Mfr# BIPOD102 = $20.67 Cheaper than Dirt club price

    Total cost – $31.66
    Works great

    😀 😀

    #28290
    walkonking
    Participant

    The price for the Airforce Tripod is a rip off. I have one but I got it from my good friend Steve Ct for $30.

    It is good to have friends. If I need to do it again I would mount a Harris Clone to the forearm.

    #28300
    randyhub
    Participant

    Yeah gave away my AF bipod bought an adaptor rail ans a bipod off EBay no comparison in the robust build or and I also put a fold down grip for a palm rest.

    Randy

    I know you guys have all seen my toy but here it is to show the grip and bipod upgrade.

    Randy

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.