Taipan Laminate airgunUragans airgun

Air Max Dominator .22

Home Forums Other Guns Other Guns Air Max Dominator .22

This topic contains 9 replies, has 2 voices, and was last updated by  miksatx 1 year, 1 month ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #22847

    miksatx
    Participant

    good looking air rifle. looks like a updated version of a BAM 50 only lighter, speaking of weight they say 5lbs. lol mine must have a large dinner before it was delivered my scales say over 6.4.

    #271238

    papa-schultz
    Participant

    Looks good on the photos. You’re testing out the different AirMax-es? Looking forward to read your findings on this one.
    Have fun anyway 🙂

    #271240

    miksatx
    Participant

    HI Papa, I just bought this and the P15 mainly cause they are offered with the titanium tubes along with side lever. People seem to have been requesting them from airgun mfg. an it seems to me the only mfg listening is the Chinese. I like the lightness of the titanium but the pressure capability was what peaked my interest. It’s not backyard friendly I’ve shot it a couple times +900×2. The barrel is tensioned to the shroud and breech. Was strange pulling the muzzle adapter and having the barrel wobble so freely.

    #271616

    miksatx
    Participant

    Dang this one opposite of the p15. It shoots down with the oem and huma regulators 902/825/705/658/601/582.

    #271822

    miksatx
    Participant

    I have the Huma reg installed pressure set to 140b again after working up there 5b at a time. Right now hammer 1/2 turn off full hammer seems to be shooting 760 fps. It shoots H&N FTT 14.66/ 5.53 best so far at this speed. Hole in hole at 15 yrds and right on target @ 20yrds.

    #272374

    miksatx
    Participant

    So it seems these guns have a spring problem also. When I got my gun the hammer spring was maxed out hammer spring screwed all the way in. One owner shimmed the hammer spring and got a big jump in fps. Mine was shooting the 14.66 pellet with the hammer spring maxed out shooting 760fps. Pulled the hammer spring dropped a piece of ptfe rod in the back of the hammer bout 5/16″ length. Screwed my hammer spring just 3 turns in gun starts shooting 14.66 880s. Wouldn’t that indicate the spring is to weak? I’d rather find a better spring instead of shimming the hammer.

    #272501

    miksatx
    Participant

    Well a partial shot string reg 120bar 220 bar fill. 4-11 shot mags. Don’t know why the chrony missed the first shot. But it sure threw numbers whacky for ES and SD.
    1-0. 12-838 23-832 34-838
    2-840 13-839 24-840 35-834
    3-832 14-841 25-835 36-836
    4-834 15-836 26-838 37-834
    5-835 16-837 27-831 38-826
    6-832 17-838 28-838 39-832
    7-836 18-841 29-836 40-835
    8-838 19-843 30-840 41-829
    9-831 20-835 31-839 42-839
    10-830 21-833 32-833 43-831
    11-842 22-835 33-831 44-833

    #272580

    miksatx
    Participant

    Just shot this with h&n ftt14.66 reg set 120bar fill 230bar shot down to 120bar.

    #275677

    miksatx
    Participant

    Coming to my house soon!

    #275743

    miksatx
    Participant

    Ok m16 made it back and redressed.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.

Skip to toolbar