6mm Talondor

Home Forums AirForce General Chat 6mm Talondor

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #536387
    caboose212
    Participant

    I’ve got a “Bowman” 6mm slug mold, and I’m assembling a 6mm gun using a Talon frame, an older condor valve, 62 cu in tank Modified for M18 threads by Doug Noble, and a hammer and tank adapter from Talon Tunes. Barrel is only 20″ long though. I’ll update here once I get the barrel and bushings machined up. I plan on running an LDC made by Neil Clague…

    #536388
    caboose212
    Participant

    I forgot to mention- the reason for the TT tank adapter, is that based on my measurements, and confirmed this evening, the TTTA puts the larger 62 cu in tank in the same spot as a factory tank- at least with regard to LOP and where my cheek will sit. I’ll definitely need the larger tank, since a 20″ barrel won’t be all that efficient.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.