19" .25 barrel and 2500psi etacreg
Thought I would let you bunch of degenerates know what to expect from the afore mentioned set up.
JSB kings do about 875 and Kodiaks around 850.
Slower than I was hoping for. I could up it a bit by putting the longer one of my superb one piece stems made by Dave424, but I’ll be wasting air. Been there, done that, gone power crazy and fitted bigbore valve, long stems etc.
I’ve got past the noob stage a long while back and am happy with it being very consistant, very frugal on air and VERY accurate. I like to be able to put 50 shots within a dime at 60 odd yards before a refill….. 😎
All Replies
Viewing 8 replies - 1 through 8 (of 8 total)
.25 JSB’s. 956 down to 931.
Nice man! What pellets and speed?
Yesterday I got 62 shots with 2000 reg and 53 ci tank. 25 fps variation losing most of it at the end. 3000 fill 1850 ending.
Yeah, 53ci tank, which seem to be difficult to get hold of now I heard? I got mine from JDS just before he stopped stocking them…
Good info Pab, thanks.
After the recrown my barrel is 22ish inches long, so I would probably hit 900 with JSB which is perfect.
I too have gotten over the “mo powa” phase, and a flatter curve couldnt hurt.
Nice pabs! Tthat’s with the 53 ci tank?
I would have thought maybe a bit higher in fps but like you said, I think I am on that path also fast is good but a bit slower is more consistent and accurate so when you aim you hit what you aim at this is a good thing Mate 😯 😯 😯 😆
Viewing 8 replies - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
What were your results with heavier ammo and the regulator?
I’m looking at buying a .25 Condor and looking at all of the options. I have a 4500 68ci paintball tank and was considering the JSB 4500/E-TacReg combo and was wondering what I could expect.
My paintball tank is 3-5/8″ wide and 9-1/2″ long without the regulator. The E-TaCReg and JDS regulator combo would make it 13″ long.
I’m thinking E-TaCReg with the straight drop would work best.
Any helpful advice?