New Home › Forums › AirForce › Talon/Talon SS › Drilling bushings › Reply To: Drilling bushings
Hey John….
You will be fine with 1/8 bit. You just want to allow air flow without stressing the bushing. The SS with stock 12′ barrel are more forgiving than the bushings for the larger O.D. barrels.
Good Luck.
Hey John….
You will be fine with 1/8 bit. You just want to allow air flow without stressing the bushing.
The SS with stock 12′ barrel are more forgiving than the bushings for the larger O.D. barrels.
Good Luck.