Talon/Condor Custom Upgrades! Check it out.

[WalkonKing]

.....................................................



Hi everybody being part of the administration here on the TAG and a founding father has some perks and one of them is me getting a space to show off my creations.

I have come up with some various upgrades for the Airforce line of rifles and will continue to do so in the future. Currently I offer the Wokbutt which is the original adjustable shoulder piece for the Talon/Condor. Also I offer the Billet Trigger guard and a grip adapter that allows the use of many AR15 aftermarket grips, as well as a aluminum disc upgrade for the shoulder piece that provided a stable foundation for the shoulder pieces to attach to instead of the stock plastic one.


If you need to contact me send me a PM here or an email to hexcanemaker@hotmail.com.

-------------------------------------------------------------------------------
-------------------------------------------------------------------------------

Here is the "Wokbutt" that is designed as a drop in replacement for the stock shoulder piece for the Talon/Condor. It is hand crafted by me and made of aircraft grade aluminum 6061-T6 aluminum has a hard matte black powder coat finish and fitted with stainless steel hardware.

It provides a much improved shouldering of the gun and allows for more comfortable and consistent head postion and is adjustable for a custom fit to the shooter.

The cost is $55



-------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------

This is the "Wokbutt Strap-On" and is designed to attach to any tank by the use of hose clamps or heavy duty zip ties. It provides a rock solid mounting option that many have chose to also use on CO2 tanks.

Price $75







---------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------

A nice cosmetic and functional upgrade I came up with is the "Billet Trigger Guard" it is milled from 6061 aluminum and given a hard powder coat finish. This model is a drop in replacement and fits the stock grip. It also comes with a black safety knob that makes using the safety much easier. Also many find the trigger guard as a good placement for their hand which shooting.

Price $55 w/knob $50 without


============================================================================

Next is the "AR 15 Grip Adapter". You can put the AR 15 grip of you choosing on your Talon. It is made of aircraft grade aluminum and has a hard powder coat finish. Some grips work better then others due to the funky rear area on the Talon frame. Many choose to use the Hogue AR15 grip which fits well. The adapter is made to fit "Billet Trigger Guard" and can use the stock trigger guard as well.

Price is $50









============================================================================

Here is something new that replaces the stock plastic mounting disk for the shoulder piece. I call it a "Woktank Disk". It is turned from aluminum and fitted with a threaded thread insert to bolt the should piece to.

You can sandwich the disc between the end of the tank and cover just like the stock one. Or some have used JB weld to mount the disc to the rear of the tank for a permanent and rigid mount.

EVERYBODY WHO HAS A TALON OR CONDOR SHOULD HAVE ONE OF THESE. The plastic disc breaks with use and is crap.

Price $20








Here is a nice picture of several pieces of my work that belongs to TAG Member "Sawtime". It is his gun and he took the picture.
Thanks Saw



===========================================================

Here are some shot of my shop and tools I use to make the goodies.







[/img]

This is another style of AR 15 adapter I am working on.








_________________
Adam SoCal on the Yellow Forum.

http://talonairgun.com/forum/viewtopic.php?t=9980

[WalkonKing]

Here is the newest changes to the Strap On Wokbutt.


_________________
Adam SoCal on the Yellow Forum.

http://talonairgun.com/forum/viewtopic.php?t=9980

[WalkonKing]

Here are some pictures of the " WOK GARD 15". It is a custom made integral trigger guard and AR15 grip adapter for the Airforce rifles. It greatly improves the look of the rifle and allows for an AR15 grip to be fitted. As an added bonus it provides added rigidity to the frame making for a more accurate rifle

The are made from a single block of aircraft grade aluminum 6061. They are milled by myself and made one at a time. They are finished with a hard baked powder coat finish which is tough.

The cost is $100

[WalkonKing]

Installing the One Piece Trigger Guard and AR15 Adapter on the Talon/Condor.

1. Unbolt the forearm piece from the frame

2. Unbolt the forward trigger guard bolt.

3. Be careful to not allow the metal strap over the trigger components to lift up and lose your springs. A piece of tape will hold it down temporarily.

4. Remove the bolt up inside the stock grip and remove grip. Becareful to not loose the lug inside the frame. The line on the lug indicates the position of the bolt hole for installing bolt.

5. Remove trigger shoe.

6. Slip New guard/adapter in place and place place the original trigger guard bolt into forward hole but do not tighten

7. Slip rear bolt into the rear adapter hole and align with lug in frame. The line on the lug should line up with the bolt. You might have to adjust the metal strap under adapter so the bolt fits. Be sure to remove the tape holding the strap if you used any.

8. Gently tighten both front and back bolts being sure they are aligned properly while tightening. Snug up the bolts

9. Install trigger shoe

10. Slip on your AR15 grip and use bolt provided to tighten.

Now your new trigger guard/AR15 Adapter is installed and ready to use.

Thanks,

Adam





8

[WalkonKing]

Here are what I am charging for shipping costs

A small flat rate priority box with delivery confirmation $8

A small International Flat Rate Priority Box with customs declaration # $15

Bigger boxes will cost more

For over seas shipping I will use the International Flat Rate Boxes and the only method of remotely tracking your package is to use the Customs Declaration number. If your package gets lost I am sorry but I can not replace it due to the inability to actually check if the package was delievered or not. If you want to order then you assume all Risk on if it makes it to you or not.

When using PAYPAL please write down what you are ordering in the note section before sending

Thanks

Adam

[WalkonKing]

This is a Mini Wokbutt for the new Airforce Edge.

It will allow a height adjustable and allows for better positioning of the head placement. It also will adjust for offset and cant positioning.

Soon I will have picts once RobNC gets it on his edge.









Here is one I did for another Edge

[WalkonKing]

I thought I would throw up some pictures of the "Spartan Wokbutt"

This is a no frill adjustable shoulder piece for the Talon/Condor. It has about 1/2" of height adjustment and is adjustable for off set and cant just like the Wokbutt.

I am able to keep the price down to $30 by eliminating a lot of the machining and hand work that is done on the $55 Wokbutt.

I make this on special order and during the run of regular wokbutt. They are made of aircraft grade aluminum 6061-T6 and fitted with stainless steel hardware and matte black powder coat finish.

Hard to beat at $30

For those who want to save some $$ this is a good option.

Spartan Wokbutt

[WalkonKing]

I am currently taking order for

WOKBUTT $55

Mini Wokbutt for Edge $45

Strap On Wokbutt $75

Tank Disc $20

WOKGARD 15 $100

Metal Trigger Introductory Price $25

Email me or send me a PM here if you wish to place an order

hexcanemaker@hotmail.com

Thanks

Adam
_________________
Adam SoCal on the Yellow Forum.

http://talonairgun.com/forum/viewtopic.php?t=9980

[WalkonKing]

Here is the new trigger I came up with.

Aluminum 6061-T6
Black Powder coated.

It is 1/2 wide and give a nice feel when on the trigger.

$25




If you have any questions feel free to ask on the forum or PM me here or send email to hexcanemaker@hotmail.com
_________________
Adam SoCal on the Yellow Forum.

http://talonairgun.com/forum/viewtopic.php?t=9980