Hi guys ;
I am guite a noob in pcps , i have 15 yers experiane with fireguns but never pcp,
so pls
1- what kind of gun do i hve ?
2-why it behave like that , how can i make it more accurate ?
3-what is that screw on top of the gasbottle ?
and how to set it ?
Thanks Alot
1) looks like a talon SS or Gunpower..like stated above..one and the same
2) often these guns shoot better at lower fill pressure…just because ti can go the 3000psi..does not make it the best choice.
Try filling to 2600-2700psi..see how it shoots down to 1800-2000psi
3) if you are referring to the Tophat (part on left with 2 little grub screws)..it can be moved in or out by loosening those screws. This alows more or less air to flow out the valve. Another way to adjust power.Keep an eye on them grub screws, they tend to come loose and when that happens, the gun shoots like crap. CHECK YOURS!
Looks like a newer gun..it has the spin-lock tank on it…
I am guite a noob in pcps , i have 15 yers experiane with fireguns but never pcp,
so pls
1- what kind of gun do i hve ?
2-why it behave like that , how can i make it more accurate ?
3-what is that screw on top of the gasbottle ?
Thanks Alot
1) looks like a talon SS or Gunpower..like stated above..one and the same
2) often these guns shoot better at lower fill pressure…just because ti can go the 3000psi..does not make it the best choice.
Try filling to 2600-2700psi..see how it shoots down to 1800-2000psi
3) if you are referring to the Tophat (part on left with 2 little grub screws)..it can be moved in or out by loosening those screws. This alows more or less air to flow out the valve. Another way to adjust power.Keep an eye on them grub screws, they tend to come loose and when that happens, the gun shoots like crap. CHECK YOURS!
Looks like a newer gun..it has the spin-lock tank on it…
Have fun playing..