Making a Micro-meter valve from Condor valve?

Made a new Valve or a set of Grips? Need some advice on how to vent your Bushings? This is the place.

Moderators: PANDEMIC, WalkonKing, Y

User avatar
Rrdstarr
Posts: 283
Joined: Thu Feb 26, 2015 7:12 pm
Location: Clarkston, WA and Victoria, BC Canada

Making a Micro-meter valve from Condor valve?

Postby Rrdstarr » Thu Jan 19, 2017 12:39 am

What would it involve? I have a lathe/mill combo, so doing the work should be fine. Just need to know the differences.
Pardini K10, (4) Crosman MK I .22, Brocock Concept .22, Talon SS .22, TalonP .25, Mrodair CP-1M .22 and .177

User avatar
Rrdstarr
Posts: 283
Joined: Thu Feb 26, 2015 7:12 pm
Location: Clarkston, WA and Victoria, BC Canada

Re: Making a Micro-meter valve from Condor valve?

Postby Rrdstarr » Thu Feb 16, 2017 2:56 am

Nobody has any input on this subject? I believe I will have two more AF rifles on the way this week!
I do have a couple of Condor valves if anyone is interested in doing a straight swap for Micro-meter valve!!!

Thanks, Rick
Pardini K10, (4) Crosman MK I .22, Brocock Concept .22, Talon SS .22, TalonP .25, Mrodair CP-1M .22 and .177

RONIN001
Posts: 402
Joined: Fri Aug 09, 2013 9:07 am
Location: KY

Re: Making a Micro-meter valve from Condor valve?

Postby RONIN001 » Tue Feb 21, 2017 8:22 pm

try this GTA forum (Machine shop Talk) for some info

http://www.gatewaytoairguns.org/GTA/index.php?board=15.0

User avatar
Rrdstarr
Posts: 283
Joined: Thu Feb 26, 2015 7:12 pm
Location: Clarkston, WA and Victoria, BC Canada

Re: Making a Micro-meter valve from Condor valve?

Postby Rrdstarr » Tue Feb 21, 2017 11:03 pm

Nothing. talking about them, but no specific measurements?!?!?
Pardini K10, (4) Crosman MK I .22, Brocock Concept .22, Talon SS .22, TalonP .25, Mrodair CP-1M .22 and .177


Return to “Mods/Machinists”

Who is online

Users browsing this forum: No registered users and 2 guests